Dating a seth thomas clock

Around 1900, the model 89 movement was introduced, having the escapement between the plates.

dating a seth thomas clock-67dating a seth thomas clock-70dating a seth thomas clock-74

Current Photo • Current Map Seth had a natural ability for carpentry and he probably obtained his knowledge and interest in mill property and manufacturing from this.

He had imited formal education and left school at an early age to become an apprentice carpenter and joiner to Daniel Tuttle, of Plymouth.

“That our business has throughout half a century steadily increased from a small beginning to its present dimensions, is sufficient evidence of the quality of our work.

No pains will be spared to maintain and increase the reputation of the “SETH THOMAS CLOCKS,” and we give our warrant to the full amount of the cost, that every clock that leaves our factory, if properly used, will prove a good Time Keeper.

The movement provides a guide to the date of an Adamantine clock.

At first, most Adamantine clocks used a modified shelf clock movement (called the "hip" movement because of its shape) with the escapement outside the back plate.

Examples in these other woods are seldom seen.) The sides of the case are fitted with decoratively brass inserts. The front door of the clock is decorated with quarter fans. A brass trim ring is attached to the interior of the door and secures the glass in the opening. This dial also features a subsidiary seconds dial and the Maker's trademark. This example is in very good condition and is ready to enjoy.

This door opens to a access the painted dial which measures approximately 8 inches in diameter. It is interesting to note that a shelf clock that features a second hand on the dial is somewhat unusual. The spring driven, eight day, time and strike movement is constructed in brass. It was made in January of 1888 and is so dated on the back of the case in the Seth Thomas code that reads, "88811." Inventory number 215006.

I found an interesting piece today, an old Seth Thomas 30 hour spring clock.

I am mainly looking for info on a date it was produced.

(angel figural clock made by Seth Thomas’s Sons & Company shown below) By the year 1870, 133,000 clocks were being produced annually at the Thomaston factory.

Tags: , ,